-
A fire sleeve can fit the hose and still fail to pass over its end fitting. It can also pass over the fitting but sit too loosely along the hose. These are separate checks, and a useful fire sleeve size chart needs to address both. Select the sleeve inside diameter from the actual outside diameter of the hose, tube or finished cable bundle. Then check the largest fitting or connector the sleeve mu...
read more
-
To measure custom sewn bellows, record the shortest and longest distances between the same two mounting reference points, the space required around the protected component, the maximum outside envelope and the dimensions of both end fittings. For a straight axial installation, the difference between the two installed lengths is the required bellows travel. A cylinder stroke or a photograph of an o...
read more
-
Silicone coated fiberglass fabric for removable insulation jackets is used as a flexible outer cover around the insulation core. It provides a coated surface for handling and environmental exposure, while the insulation inside the jacket performs a different job: limiting heat transfer from the equipment. Choosing that outer fabric takes more than matching a color or thickness. A valve cover opene...
read more
-
There is no single correct thickness for every removable insulation blanket. Two covers installed on equipment at the same temperature may need different insulation thicknesses because the equipment diameter, ambient conditions, available clearance, core material and required surface performance are different. A useful thickness decision starts with the job the blanket must do. Is the priority to ...
read more
-
Ordering a custom exhaust insulation sleeve involves more than selecting a fiberglass material and giving an approximate pipe diameter. The sleeve has to fit the actual exhaust line, cover the correct heated section and remain practical to install around connections, bends and nearby equipment. For heater manufacturers, marine equipment suppliers, vehicle builders and replacement-part distributors...
read more
français
Deutsch
русский
italiano
español
português
Nederlands
العربية
日本語
한국의
Türkçe
Polski
Tiếng Việt
slovenský
Indonesia
