-
A hydraulic hose is already connected, routed through the machine and held in position. The next maintenance review identifies a section that needs additional abrasion protection. Sliding a tubular sleeve over that assembly may require access that the installation does not provide. A wrap-around nylon hose sleeve is a removable textile cover that opens along its length and closes around an accessi...
read more
-
A custom insulation blanket can only fit as well as the information used to make its pattern. Overall length and diameter are a useful starting point, but they do not show valve stems, flanges, support brackets, cable entries, drain points or the space available for opening the cover. This guide explains how to collect practical measurements for a removable insulation blanket, which photographs to...
read more
-
To measure custom sewn bellows, record the shortest and longest distances between the same two mounting reference points, the space required around the protected component, the maximum outside envelope and the dimensions of both end fittings. For a straight axial installation, the difference between the two installed lengths is the required bellows travel. A cylinder stroke or a photograph of an o...
read more
-
On an existing hose assembly, both end fittings may already be connected, the route may pass behind equipment, and access may be limited to a short exposed section. In that situation, the first fire sleeve question is not the nominal diameter. It is whether a tubular sleeve has a practical installation path. A removable fire sleeve opens lengthwise so it can be wrapped around the hose instead of b...
read more
-
Replacing a worn machine bellows becomes difficult when there is no free end to slide a new cover over. A longitudinal zipper can provide another installation route: open the fabric body, position it around the existing component and close it in place. The benefit depends on the complete assembly, not the zipper alone. BSTFLEX sewn zippered bellows are made for applications requiring removable pro...
read more
-
A replacement rectangular bellows can match the old cover's width and still fail to fit the machine. The mounting frame may sit at a different height, a lubrication fitting may catch the folds, or the compressed cover may occupy space needed by the moving table. For linear rails and machine ways, the replacement specification must describe the installation, not just the loose fabric cover. BSTFLEX...
read more