-
A fire sleeve can fit the hose and still fail to pass over its end fitting. It can also pass over the fitting but sit too loosely along the hose. These are separate checks, and a useful fire sleeve size chart needs to address both. Select the sleeve inside diameter from the actual outside diameter of the hose, tube or finished cable bundle. Then check the largest fitting or connector the sleeve mu...
read more
-
On an existing hose assembly, both end fittings may already be connected, the route may pass behind equipment, and access may be limited to a short exposed section. In that situation, the first fire sleeve question is not the nominal diameter. It is whether a tubular sleeve has a practical installation path. A removable fire sleeve opens lengthwise so it can be wrapped around the hose instead of b...
read more
-
Knitted fiberglass gasket tape is worth evaluating when an equipment seal needs a soft, conformable strip. Woven fiberglass tape is an alternative where a firmer, more dimensionally restrained textile suits the joint. Neither construction is automatically the better seal. Compare the contact it makes under the available closing load, not just its softness in the hand. Both constructions are used i...
read more
-
Ceramic fiber tape, silica tape and fiberglass tape can all be used for industrial insulation and thermal sealing, but they should not be selected from the highest temperature number alone. The correct choice depends on the continuous temperature at the tape, peak exposure, reinforcement, flexibility, installed movement, sealing function and the technical evidence available for the exact construct...
read more