Anhui Parker New Material Co.,Ltd
ISO9001      IATF16949

insulation blanket manufacturer
Products

Woven E-Glass Electrical Insulation Tape with Colored Tracer Line

BSTFLEX Woven E-Glass Electrical Insulation Tape with Colored Tracer Line is made from continuous-filament E-glass yarn and woven into a thin, flexible, non-adhesive insulation tape. A longitudinal colored tracer line provides a clear visual reference during manual or machine wrapping and can also identify a specified thickness, grade or product code.

The tape is designed for transformer windings, electric motor coils, generators, reactors, electrical cables and other high-temperature electrical insulation assemblies. Width, thickness, roll length, spool core, tracer color and packaging can be reviewed for OEM production. Electrical, tensile and temperature requirements should be specified for the exact construction being ordered.
  • order(moq):

    1
Product Detail

BSTFLEX Woven E-Glass Electrical Insulation Tape with Colored Tracer Line is a thin, flexible, non-adhesive tape woven from continuous-filament E-glass yarn. It is designed for electrical winding, coil binding, cable wrapping and mechanical retention in motors, transformers, reactors, generators and other industrial electrical equipment.

A colored tracer line runs longitudinally through the center of the tape. The line gives the operator a clear visual reference during manual or machine wrapping and can be used as an agreed color code for thickness, construction or product identification.

In this product, the colored line is a visual tracer rather than a metallic wire or load-bearing reinforcement. The tracer color, yarn material and identification rule should be stated in the product specification.


Why Is There a Colored Line in the Center?

Uniform wrapping can be difficult when a narrow white tape is applied around a coil, cable or irregular electrical component. The longitudinal center line helps the operator observe the tape position and maintain a consistent winding path.

The tracer line can serve two functions:

  • Wrapping guide: provides a visible reference during hand taping or machine taping;
  • Product identification: allows an agreed color to identify thickness, weave, specification or production code.

Where the color is used for product identification, the meaning of each color should be defined in the drawing, purchase specification or approved sample. A red, blue or green line should not be assumed to represent a universal industry thickness unless the buyer and supplier have agreed on the same color code.


Electrical-Grade Woven E-Glass Construction

The tape is woven from continuous-filament E-glass yarn. Compared with thick, texturized fiberglass lagging tapes, this construction is thinner and is intended primarily for electrical winding, binding and wrapping applications where controlled dimensions and a stable woven structure are required.

The product page covers the plain, non-pressure-sensitive construction. If the application requires resin impregnation, acrylic treatment, silicone treatment or another coating, that requirement should be stated separately because a coating can change thickness, flexibility, temperature capability and electrical performance.


Key Product Features

  • continuous-filament E-glass yarn;
  • narrow woven electrical insulation tape;
  • plain, flexible and non-adhesive construction;
  • colored longitudinal tracer line;
  • suitable for manual and machine wrapping;
  • custom width and thickness available for review;
  • custom roll length and spool core options;
  • red, blue or other agreed tracer colors;
  • OEM packaging and identification options;
  • technical parameters confirmed according to the ordered construction.


Industrial Applications

Transformer Winding and Coil Binding

The tape can be used for winding insulation, coil binding, lead retention and protective wrapping in dry-type transformers and other transformer assemblies. The required tape thickness, tensile strength, roll format and compatibility with the customer's impregnation process should be confirmed before approval.

Electric Motor Winding

Woven fiberglass electrical insulation tape can be applied around motor windings, end turns, coil sections and selected insulation details. The colored tracer line helps operators follow the winding path and distinguish the specified tape construction during production.

Generator and Reactor Insulation

The product can be evaluated for generator coils, air-core reactors, inductors and other electrical components that require heat-resistant woven binding or wrapping tape.

Electrical Cable Wrapping

The tape can be used as a woven wrapping and binding material in electrical cable constructions, including applications where the insulation system must retain useful mechanical and electrical properties at elevated temperature.

For FRLS cable or other regulated cable constructions, the tape should be approved as part of the complete cable design. The product name alone does not establish compliance with a cable flame, smoke or electrical standard.

Electrical Appliance and Industrial Equipment Windings

Other possible applications include electrical heating equipment, coils, switch components, winding-wire insulation, electrical bases and selected industrial electrical assemblies.

Manual and Machine Wrapping

The tape can be supplied for hand taping or machine taping, subject to the required roll length, core size and winding condition.

For manual wrapping, specify a roll and core format that operators can handle safely and consistently.

For machine wrapping, provide:

  • tape width;
  • finished thickness;
  • roll length;
  • core inside diameter;
  • maximum roll outside diameter;
  • winding direction;
  • machine speed;
  • required tape tension;
  • allowed roll joins;
  • tracer-line position and color.

The tape should be trialed on the actual winding machine before a large production order is approved.


Colored Tracer Line Options

The tracer line can be customized according to the buyer's identification system.

Specification Item Available Requirement
Tracer Position Centered longitudinal line or another agreed position
Tracer Color Red, blue, green or another agreed color
Tracer Function Wrapping guide, thickness identification, grade identification or product coding
Tracer Material Confirmed according to the approved construction
Color-Code Rule Defined by drawing, purchase specification or approved sample

The colored line should not be described as conductive, load bearing or mechanically reinforcing unless the exact product has been designed and tested for that function.


Recommended Product Specification Fields

Property Specification Requirement
Base Material Continuous-filament E-glass yarn
Construction Narrow woven fiberglass tape
Surface Plain, non-adhesive unless otherwise specified
Standard Appearance White woven fiberglass tape with a colored longitudinal tracer line
Width According to confirmed customer specification
Thickness According to confirmed customer specification and measurement method
Roll Length Standard or custom roll length according to manual or machine wrapping requirements
Core / Spool Core inside diameter and roll format confirmed with quotation
Tracer Color Red, blue, green or custom color
Packaging Individual roll, bulk carton, private label or OEM packaging


Technical Data to Confirm Before Ordering

The final technical data should be linked to the exact width, thickness, weave and treatment being purchased. Depending on the application, the buyer may request:

  • ends per unit length;
  • picks per unit length;
  • tape width and tolerance;
  • thickness and measurement pressure;
  • tensile strength;
  • elongation at break;
  • breakdown voltage or dielectric test;
  • continuous operating temperature;
  • roll length and tolerance;
  • number of permitted joins per roll;
  • core or spool dimensions;
  • tracer-line color and position;
  • compatibility with insulating varnish or resin where required.

Electrical, tensile and temperature values should not be transferred from another thickness or another manufacturer's product. Test requirements must be confirmed for the BSTFLEX construction being ordered.


How to Select the Tape

Before requesting a quotation, define the winding or binding operation.

RFQ Item Information to Provide
Application Transformer, motor, generator, reactor, cable or electrical appliance
Installation Manual wrapping or machine taping
Dimensions Width, thickness, roll length, core inside diameter and maximum roll diameter
Tracer Line Color, position and identification purpose
Mechanical Requirement Tensile strength, elongation and winding tension
Electrical Requirement Voltage class, dielectric requirement and test method
Thermal Requirement Continuous operating temperature, peak temperature and insulation class
Process Compatibility Varnish, resin, impregnation, curing or other manufacturing process
Supply Sample quantity, production quantity, annual forecast and packaging


Colored Tracer Line vs Reinforcement Yarn

A colored tracer line is used for visual guidance and product identification. A reinforcement yarn is selected to carry a mechanical load or change the structural performance of the textile.

The two terms should not be used interchangeably. If the application requires additional longitudinal strength, provide the tensile requirement and request a separately engineered construction rather than assuming the colored center line supplies reinforcement.


Plain Tape vs Coated Electrical Fiberglass Tape

This product page is intended for the plain woven construction. Plain tape is suitable where the customer's winding, binding or impregnation process does not require a factory-applied coating.

If acrylic, silicone, PTFE or another treatment is required, specify:

  • coating chemistry;
  • coating amount;
  • finished thickness;
  • required flexibility;
  • continuous and peak temperature;
  • electrical test requirement;
  • compatibility with the complete insulation system.

A coated product should be quoted and controlled as a separate construction.


Quality and Repeat-Order Control

For repeat OEM supply, use an approved specification rather than ordering only by product color and width.

The repeat-order document should include:

  • BSTFLEX part number;
  • material and weave;
  • width and thickness;
  • tracer-line color and position;
  • roll length and core size;
  • permitted joins;
  • mechanical and electrical requirements;
  • packaging and labeling;
  • approved sample or drawing revision.


Frequently Asked Questions

What is the colored line in the middle of the fiberglass tape?

It is a visual tracer or guide line. It helps the operator maintain a consistent wrapping path and can identify an agreed thickness, grade or product specification.

Is the center line a metal wire?

No. In this product type, the center line is specified as a colored visual tracer rather than a metallic reinforcing wire. The actual tracer yarn material should be confirmed in the product specification.

Can different line colors identify different thicknesses?

Yes, provided the buyer and supplier agree on a color-code table. There is no universal rule that every red or blue line represents the same thickness across all manufacturers.

Can this tape be used for machine winding?

Yes. Roll length, core size, winding direction, maximum roll diameter and tape tension should be confirmed for the customer's machine.

Is this tape adhesive backed?

The standard product described here is plain and non-adhesive. Coated or adhesive constructions should be specified and quoted separately.

Can the tape be used for transformer and motor winding?

Yes. It is designed for electrical winding, binding and wrapping applications. The dimensions, temperature class, tensile strength and electrical requirements should be approved for the specific insulation system.


Request Woven Fiberglass Electrical Insulation Tape

BSTFLEX supplies woven E-glass electrical insulation tape with an optional colored tracer line for transformer winding, motor coils, generators, reactors, cable wrapping and other industrial electrical insulation applications.

Send the required width, thickness, roll length, core size, tracer color, winding method, electrical requirement, temperature class and order quantity for technical review and quotation.

For other industrial tape constructions, review the BSTFLEX High Temperature Tapes range.

Request an E-glass electrical insulation tape sample and quotation.

Send A Message

If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

related products
High Temperature Silica Tape with PSA
High Temperature Silica Tape with PSA is a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhesive backing that facilitates installation. Used to protect the hose, cable or pipe.
High Temperature Woven Fiberglass Tape
BSTFLEX woven fiberglass insulation tape is designed for industrial pipe lagging, equipment joints and thermal wrapping. Its texturized fiberglass construction follows pipe contours and can be cut for maintenance or equipment assembly work. Choose the tape width and installed thickness to suit the component, heat exposure and fixing arrangement. Standard roll sizes and custom dimensions are available, with adhesive-backed options on request. Send your operating conditions and quantity for product selection and a quotation.
Heat Insulation Ceramic Fiber Woven Tape
Heat Insulation Ceramic Fiber Woven Tape is a high-temperature insulation tape designed for thermal sealing, wrapping, and protection in extreme heat environments. It is manufactured from alumino-silicate based ceramic fiber yarns reinforced with high-temperature fiberglass, providing excellent heat resistance, flame resistance, and dimensional stability. The tape is white, odorless, and suitable for continuous high-temperature industrial applications with service temperatures up to 2300°F, making it widely used in furnace systems, exhaust insulation, expansion joints, and other thermal processing equipment.
High Temperature Silica Woven Tape
Silica Woven Tapes are intended for high temperature applications with continuous service up to 1,800°F (982°C). Silica Tape is a high temperature woven Tape which is use for Equipment Fire Protection, Heat Insulation of Pipe Hoses and Electric Cable, Resist Splattering of Welding and Molten Metal.
Heat Reflective Aluminum Fiberglass Tape
Aluminium Foil Fiberglass Tape is made of glass fiber and aluminium foil. This heat reflective tape has outstanding reflectivity to the heat . Protects from radiant heat by reflecting 90% of the heat that contacts its surface. The aluminum layers will not delaminate from the glassfiber, even under the most extreme heat conditions. 
Self-Fusing Silicone Rubber Electrical Tape
Self-Fusing Silicone Rubber Electrical Tape is a high temperature resistant grade of silicone self-amalgamating tape designed for sealing, insulating and bundling. This tape is manufactured from high quality silicone rubber and comes with an easy-release liner that makes installation very easy.
Heat Reflect Shield Tape with Adhesive Backing
Heat Reflect Shield Tape with Adhesive Backing is a heat shielding tape that can withstand temperatures of up to 300°F.  The self-extinguishing, fire-retardant material making this heat shielding tape the perfect choice for the automotive industry. The clear, acrylic-based or silicone-based, high-temperature transfer adhesive provides a secure seal to ensure longevity of protection.
High Temperature Basalt Tape
BT High Temperature Basalt Tape combine thermal performance and exceptional aesthetics to provide an ideal option for wrapping exhaust manifolds and tubes. Basalt tape is suitable for a wide range of applications such as automotive, aviation, construction, electromagnetic shields, high temperature seals and curtains.Basalt is also non-combustible and offers good thermal protection making it suitable for many insulation and high temperature applications.
leave a message

leave a message

    If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

Home

Products

About

Contact

top