Fiberglass Exhaust Hose Insulation Sleeve is designed to reduce heat transfer from hot exhaust hoses and pipes in diesel heater, marine heater, vehicle and equipment exhaust systems.
Made from high-temperature fiberglass, the sleeve provides a practical thermal barrier around exhaust components where nearby wiring, hoses, panels, flooring or other temperature-sensitive parts require additional heat protection.
Sizes can be customized according to the exhaust hose or pipe dimensions. Custom inside diameter, length and production specifications are available for OEM, replacement and bulk supply requirements.
order(moq):
1Manufactured from heat-resistant fiberglass, the sleeve helps reduce radiant and conductive heat transfer from the exhaust line to surrounding components. This is particularly useful where exhaust hoses pass close to wiring, fuel lines, air ducts, flooring, body panels, equipment housings or other materials that may be affected by heat.
The sleeve is available in custom sizes. Diameter, length and overall dimensions can be produced according to the exhaust hose, exhaust pipe or installation requirements.
Exhaust systems use many different pipe and hose diameters, so a single fixed sleeve size does not suit every installation.
BSTFLEX can manufacture the exhaust hose insulation sleeve according to the actual dimensions of the exhaust line. Buyers can specify the required inside diameter, sleeve length and overall product dimensions according to the heater, exhaust hose or equipment design.
Custom sizing is particularly useful for OEM heater assemblies, replacement exhaust systems, marine installations and equipment where standard insulation products do not provide the required fit.
Fiberglass is widely used in high-temperature insulation because its fiber structure provides effective thermal resistance while remaining suitable for flexible sleeve construction.
When installed around a hot exhaust hose or pipe, the insulation layer helps reduce the amount of heat transferred toward surrounding components. This can be important in confined installations where the exhaust line cannot be positioned far away from heat-sensitive materials.
The sleeve can be used around exhaust hoses and pipes in a variety of heating and exhaust systems, including:
Marine heater installations often place exhaust components inside confined compartments where space is limited and nearby equipment must be protected from excessive heat.
A marine exhaust hose insulation sleeve provides an additional thermal barrier around the exhaust line while allowing the insulation dimensions to be matched to the specific exhaust hose or pipe.
For boat and marine heater applications, buyers should provide the exhaust diameter, required insulated length and installation details when requesting a quotation.
Diesel air heaters generate hot combustion gases that must be discharged safely through an exhaust system. Even when the exhaust pipe itself is correctly installed, nearby vehicle components may still be exposed to elevated temperatures.
Fiberglass exhaust insulation can be installed around compatible sections of the exhaust line to help reduce this heat exposure. It is particularly useful where the exhaust passes beneath vehicle floors, through equipment compartments or close to wiring and other components.
The exhaust pipe and the insulation sleeve perform different functions.
The exhaust pipe carries combustion gases away from the heater. The exhaust hose insulation sleeve is installed around the exhaust line to reduce heat transfer from the hot pipe toward the surrounding installation.
Both components can therefore be used together as part of a complete heater exhaust system.
Standard-size insulation is not always suitable for OEM equipment. Differences in exhaust diameter, routing, installation space and required insulated length can make a custom sleeve more practical.
BSTFLEX can produce fiberglass exhaust insulation according to project requirements. For OEM or bulk inquiries, buyers can provide:
The most important dimension is the outside diameter of the exhaust hose or pipe that will be covered.
The insulation sleeve should provide a practical fit around the exhaust component without creating unnecessary installation difficulty. The required length should also be determined by the section of exhaust line that needs thermal protection.
For custom projects, send the exhaust hose diameter, sleeve length and application details so that the required size can be evaluated.
| Application | Purpose of Insulation |
|---|---|
| Diesel Heater Exhaust | Reduce heat exposure around the exhaust line |
| Marine Heater Exhaust | Provide thermal protection in confined compartments |
| RV and Camper Exhaust | Protect nearby flooring, wiring and vehicle components |
| Truck Heater Systems | Insulate exhaust sections near chassis components |
| Industrial Heater Exhaust | Reduce heat transfer around equipment and assemblies |
| OEM Exhaust Assemblies | Provide made-to-size thermal insulation |
An exhaust hose insulation sleeve is a thermal insulation layer installed around a hot exhaust hose or exhaust pipe. It helps reduce heat transfer from the exhaust line toward surrounding components.
This product is manufactured from fiberglass for high-temperature thermal insulation applications.
Yes. The sleeve can be manufactured in custom dimensions according to the exhaust hose or pipe size and the required insulated length.
Yes. Different inside diameters can be produced to fit different exhaust hose and exhaust pipe dimensions.
Yes. Sleeve length can be produced according to the installation requirement, OEM drawing or customer specification.
Yes. It is suitable for compatible diesel air heater and parking heater exhaust systems where additional thermal insulation is required around the exhaust line.
Yes. The sleeve can be used for compatible marine and boat heater exhaust applications, particularly where space is limited and surrounding components require additional thermal protection.
No. The exhaust pipe carries combustion gases. The fiberglass insulation sleeve is installed around the exhaust hose or pipe to reduce heat transfer.
Send the exhaust hose or pipe diameter, required insulation length, quantity and application details for quotation. Custom sizes are available for OEM, replacement, distributor and bulk purchasing requirements.
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!
français
Deutsch
русский
italiano
español
português
Nederlands
العربية
日本語
한국의
Türkçe
Polski
Tiếng Việt
slovenský
Indonesia
