item no.:
BFGRorder(moq):
200m each sizePayment:
CIF, FOB, EXWproduct origin:
CHINAColor:
Whiteshipping port:
Shanghai, NingboThis uncoated white fiberglass rope is used as a thermal gasket, packing material and insulation cord in industrial ovens, furnaces, boilers, process equipment, expansion joints and heated pipework. It is intended primarily for static sealing and gap-filling applications where the selected construction, diameter and service temperature have been verified.
| Product Name | Fiberglass Round Braided Rope |
|---|---|
| Item Reference | BFGR |
| Material | Texturized fiberglass yarn |
| Construction | Round braided, medium-high-density firm construction |
| Profile | Round |
| Standard Color | White |
| Temperature Reference | Up to 1000°F (538°C) for the standard uncoated fiberglass construction; confirm the approved continuous and peak limits for the exact application |
| Listed Diameters | 6 mm to 50 mm |
| Supply Form | Spools, specified cut lengths or project packaging |
| Custom Service | Special diameters, lengths, packaging and OEM supply subject to production review |
Temperature note: The stated value is a material and construction reference, not a universal operating guarantee. Actual suitability depends on exposure time, hot-gas velocity, pressure, atmosphere, mechanical load, contamination, installation and any adhesive or adjoining component. The fiber softening or melting point must not be used as the continuous working temperature.
This rope is designed mainly for static thermal sealing. Applications involving shaft rotation, high fluid pressure, direct molten-metal contact, severe abrasion or a certified gas-tight requirement need a separate engineering review.
| Reference | Nominal Diameter | Nominal Weight | Standard Spool Length |
|---|---|---|---|
| BFGR-6 | 6 mm | 25 g/m | 100 m |
| BFGR-8 | 8 mm | 70 g/m | 100 m |
| BFGR-10 | 10 mm | 95 g/m | 100 m |
| BFGR-12 | 12 mm | 130 g/m | 50 m |
| BFGR-15 | 15 mm | 190 g/m | 50 m |
| BFGR-18 | 18 mm | 280 g/m | 50 m |
| BFGR-20 | 20 mm | 330 g/m | 50 m |
| BFGR-25 | 25 mm | 490 g/m | 30 m |
| BFGR-30 | 30 mm | 710 g/m | 30 m |
| BFGR-32 | 32 mm | 800 g/m | 20 m |
| BFGR-35 | 35 mm | 960 g/m | 20 m |
| BFGR-38 | 38 mm | 1080 g/m | 15 m |
| BFGR-40 | 40 mm | 1200 g/m | 15 m |
| BFGR-45 | 45 mm | 1510 g/m | 10 m |
| BFGR-50 | 50 mm | 1965 g/m | 10 m |
Weights and spool lengths are nominal production references. Confirm dimensional tolerance, finished density, spool length, order quantity and packaging on the quotation, especially for custom sizes or repeat OEM programmes.
| Construction | Typical Character | Common Selection Reason |
|---|---|---|
| Round braided rope | Firm circular section with a stable braided surface | Round or radiused grooves, curved paths and static door seals |
| Square braided rope | Flat faces and a square cross-section | Rectangular channels and joints requiring broad flat contact |
| Twisted rope | Generally softer and more conformable, with less surface stability | Irregular filling, tying, lacing or applications prioritising flexibility |
| Knitted rope | Usually more compressible and resilient than a firm braid | Grooves needing greater conformity or recovery, subject to construction |
If the equipment uses a flat-sided channel, compare our Fiberglass Square Braided Rope. Equal nominal dimensions do not mean equal installed volume or closing force, so the profile should match the groove rather than be substituted by name alone.
Do not size a replacement only from a flattened used gasket. The removed rope may have permanent compression set and may no longer represent its original diameter or density.
Specify the temperature at the rope location rather than only the furnace or oven set point. The RFQ should include normal continuous temperature, peak temperature, peak duration, cycle frequency and whether the rope sees radiant heat, hot gas flow or direct flame.
Dry fiberglass rope is commonly used with hot air and many industrial environments, but chemical and fluid compatibility must be reviewed for the actual process. State any exposure to steam, oil, fuel, solvents, acids, alkalis, dust, cleaning agents, vacuum or pressure.
Where a smoother surface, reduced fraying or different media resistance is needed, evaluate the separate Silicone Rubber Coated Fiberglass Rope. A coating changes flexibility, friction and temperature behaviour and should not be added without rechecking the complete seal design.
If the required service temperature exceeds the confirmed limit of fiberglass, review Fiberglass Rope vs Ceramic Fiber Rope before selecting a higher-temperature material.
Anhui Parker New Material Co., Ltd. supplies fiberglass round braided rope for equipment manufacturers, industrial distributors, gasket fabricators and maintenance contractors. Project options can include special diameters, specified spool or cut lengths, private-label packaging and recurring batch supply.
For repeat orders, define the approved construction, diameter tolerance, finished density or weight reference, spool length, packaging, labeling and inspection requirements. A retained sample and drawing revision help purchasing and quality teams keep later deliveries consistent.
It is used mainly as a static high temperature gasket, thermal packing or gap-filling cord in industrial ovens, furnaces, boilers, process equipment, expansion joints and heated pipework.
Round rope is designed for circular or radiused grooves and curved paths. Square rope has flat faces and usually fits rectangular channels more predictably. The groove geometry and closing condition should determine the profile.
The standard table lists nominal diameters from 6 mm to 50 mm. Special dimensions can be reviewed according to required quantity, construction and production feasibility.
Yes. Spool length, cut length, project packaging, labeling and OEM supply can be discussed. Confirm the required quantity for each diameter when requesting a quotation.
Measure the clean groove width and depth, the closed-door sealing gap and the corner radius. Then confirm the proposed compression with the manufacturer. Do not choose only from the flattened dimensions of the old rope.
It is intended primarily for static thermal sealing and insulation. Any pressurised gas, steam or liquid application requires review of pressure, media, temperature, retention and the complete joint design.
Ceramic fiber rope should be evaluated when the verified service temperature or other application requirements exceed the approved capability of the fiberglass construction. The complete rope, reinforcement and installation conditions must be considered.
Send the diameter, quantity, groove dimensions, temperature, media, equipment details and required packaging. We can review the sealing position and prepare a quotation for standard or custom Fiberglass Round Braided Rope.
For other profiles and temperature ranges, view our complete High Temperature Ropes range.
Img
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!