Heat Insulation Ceramic Fiber Woven Tape

Ceramic Fiber Woven Tape for High Temperature Heat Insulation

Product Overview

Ceramic Fiber Woven Tape is a high-temperature insulation tape designed for applications requiring reliable thermal protection, flame resistance, and dimensional stability. Manufactured from ceramic fiber yarns, this tape provides effective heat insulation in environments where conventional fiberglass tapes reach their temperature limits.

The woven structure delivers flexibility for wrapping, sealing, and gasketing applications, making ceramic fiber woven tape suitable for continuous exposure to extreme heat in industrial thermal systems.

Material & Construction

This ceramic fiber tape is produced from high-purity ceramic fiber yarns woven into a flat tape structure. The ceramic fibers offer excellent resistance to heat, flame, and thermal shock while maintaining low thermal conductivity.

Material characteristics include:

• High-temperature resistant ceramic fiber yarn

• Woven construction for flexibility and strength

• Non-combustible and flame-resistant composition

• Low thermal conductivity for effective insulation

Optional reinforcement with fiberglass or stainless steel wire is available to enhance tensile strength for demanding applications.

Typical Applications

Ceramic fiber woven tape is widely used in high-temperature industrial environments, including:

• Furnace and kiln insulation and sealing

• Expansion joint and gasket wrapping

• Exhaust system and duct insulation

• Thermal sealing in boilers and heaters

• Foundry, metallurgy, and heat treatment equipment

• Industrial ovens and high-temperature processing lines

These applications require stable insulation performance under continuous or cyclic high-temperature exposure.

Thermal Performance Characteristics

• Designed for continuous operation at elevated temperatures

• Maintains structural integrity under direct heat and flame exposure

• Excellent resistance to thermal shock and rapid temperature changes

Ceramic fiber materials are commonly selected for applications exceeding the service limits of fiberglass-based insulation tapes.

Engineering Considerations

Heat Exposure

Ceramic fiber woven tape performs reliably in sustained high-temperature environments, making it suitable for direct proximity to heat sources such as furnaces and exhaust systems.

Mechanical Strength

While flexible, ceramic fiber tapes are not intended as structural load-bearing materials. Reinforced options may be selected when higher tensile strength is required.

Chemical Resistance

Ceramic fibers exhibit good resistance to most industrial chemicals, though compatibility should be verified for aggressive atmospheres or direct chemical contact.

Technical Specifications

Installation & Use

• Wrap or position the tape around components requiring insulation or sealing

• Cut to length using appropriate cutting tools

• Overlap layers as needed to achieve desired insulation thickness

• Secure mechanically where vibration or movement is present

Proper installation helps maintain consistent insulation performance and service life.

Limitations

• Not designed for pressure containment or structural reinforcement

• Abrasion resistance is lower than coated or metal-reinforced tapes

• Direct contact with molten metal should be evaluated carefully

Selection should consider operating temperature, mechanical stress, and environmental exposure.

RFQ Information

To ensure accurate quotation and material selection, please provide the following details when requesting pricing:

• Application description and operating environment

• Continuous and peak temperature requirements

• Tape width, thickness, and length per roll

• Reinforcement requirement (if any)

• Exposure to vibration, abrasion, or chemicals

• Estimated quantity or annual usage

Use Recommendation

Ceramic fiber woven tape is recommended for high-temperature insulation, sealing, and thermal protection applications where flame resistance, thermal stability, and reliable performance are required.

Technical Documentation

Technical Overview – Ceramic Fiber Woven Tape (PDF)
This Technical Overview provides engineering-level information on material construction, thermal performance, application conditions, and RFQ requirements for ceramic fiber woven tape used in high-temperature insulation and sealing applications.

Related page:

Download Technical Overview (PDF)

Notes:

Special thickness and width upon request

Special length or packing upon request.

Img

Technical Documentation

Technical Overview – Ceramic Fiber Woven Tape (PDF)
This Technical Overview provides engineering-level information on material construction, thermal performance, application conditions, and RFQ requirements for ceramic fiber woven tape used in high-temperature insulation and sealing applications.

Related product page:
https://www.pkfiresleeve.com/heat-insulation-ceramic-fiber-woven-tape_p39.html

Download Technical Overview (PDF)