-
A double bulb tadpole gasket tape has two compressible sealing bulbs connected by a flat textile web. The two bulbs provide separate contact positions within one profile, while the connecting section establishes their spacing and can provide a mounting area where the equipment design allows. This construction is worth considering when an industrial door or panel requires two defined sealing tracks...
read more
-
A fire sleeve can fit the hose and still fail to pass over its end fitting. It can also pass over the fitting but sit too loosely along the hose. These are separate checks, and a useful fire sleeve size chart needs to address both. Select the sleeve inside diameter from the actual outside diameter of the hose, tube or finished cable bundle. Then check the largest fitting or connector the sleeve mu...
read more
-
Silicone coated fiberglass fabric for removable insulation jackets is used as a flexible outer cover around the insulation core. It provides a coated surface for handling and environmental exposure, while the insulation inside the jacket performs a different job: limiting heat transfer from the equipment. Choosing that outer fabric takes more than matching a color or thickness. A valve cover opene...
read more
-
On an existing hose assembly, both end fittings may already be connected, the route may pass behind equipment, and access may be limited to a short exposed section. In that situation, the first fire sleeve question is not the nominal diameter. It is whether a tubular sleeve has a practical installation path. A removable fire sleeve opens lengthwise so it can be wrapped around the hose instead of b...
read more
-
Knitted fiberglass gasket tape is worth evaluating when an equipment seal needs a soft, conformable strip. Woven fiberglass tape is an alternative where a firmer, more dimensionally restrained textile suits the joint. Neither construction is automatically the better seal. Compare the contact it makes under the available closing load, not just its softness in the hand. Both constructions are used i...
read more
-
The flexible connections around an induction furnace need their own protection plan. A water-cooled power lead, a separate cooling-water hose and a hydraulic line can run through the same area while performing very different jobs. Their outside diameters may look similar, but their electrical, cooling and mechanical requirements are not interchangeable. Fire sleeve for induction melting provides a...
read more
-
Ceramic fiber tape, silica tape and fiberglass tape can all be used for industrial insulation and thermal sealing, but they should not be selected from the highest temperature number alone. The correct choice depends on the continuous temperature at the tape, peak exposure, reinforcement, flexibility, installed movement, sealing function and the technical evidence available for the exact construct...
read more