-
A hydraulic hose is already connected, routed through the machine and held in position. The next maintenance review identifies a section that needs additional abrasion protection. Sliding a tubular sleeve over that assembly may require access that the installation does not provide. A wrap-around nylon hose sleeve is a removable textile cover that opens along its length and closes around an accessi...
read more
-
Carbon Fiber Braided Sleeve Sizing and Installation Guide A braided sleeve does not have one fixed diameter. Push the ends toward each other and the tube opens; pull them apart and it becomes narrower. The length changes at the same time. That is why a sleeve that slips easily over the widest part of a mandrel may cover less of the part than its cut length suggests. Start with the part drawing, th...
read more
-
Biaxial vs Unidirectional Carbon Fiber Sleeve: Which Fiber Direction Does Your Layup Need? Two sleeves can look similar before resin is applied and behave very differently after curing. The question is where the main carbon fibers run. In a biaxial braid, they cross around the tube in two diagonal directions. In a unidirectional sleeve, the principal carbon fibers run along the part. A few small h...
read more
français
Deutsch
русский
italiano
español
português
Nederlands
العربية
日本語
한국의
Türkçe
Polski
Tiếng Việt
slovenský
Indonesia
