-
Biaxial vs Unidirectional Carbon Fiber Sleeve: Which Fiber Direction Does Your Layup Need? Two sleeves can look similar before resin is applied and behave very differently after curing. The question is where the main carbon fibers run. In a biaxial braid, they cross around the tube in two diagonal directions. In a unidirectional sleeve, the principal carbon fibers run along the part. A few small h...
read more
-
3K vs 6K vs 12K Carbon Fiber Braided Sleeves: Tow Size and Product Selection A buyer asks for a 3K carbon fiber sleeve. The next question should be: for what installed diameter? The K designation describes the nominal filament count in a carbon tow; it does not specify a finished sleeve diameter, thickness or the strength of a cured tube. Those depend on the whole braid construction and the lamina...
read more
-
A fire sleeve can fit the hose and still fail to pass over its end fitting. It can also pass over the fitting but sit too loosely along the hose. These are separate checks, and a useful fire sleeve size chart needs to address both. Select the sleeve inside diameter from the actual outside diameter of the hose, tube or finished cable bundle. Then check the largest fitting or connector the sleeve mu...
read more
français
Deutsch
русский
italiano
español
português
Nederlands
العربية
日本語
한국의
Türkçe
Polski
Tiếng Việt
slovenský
Indonesia
