-
A high temperature welding blanket should not be selected from a single maximum-temperature number. Two blankets may both be described as suitable for high-temperature service while behaving very differently under welding sparks, molten spatter, radiant heat or prolonged contact with a hot component. The base fiber, coating, fabric weight, thickness, blanket orientation and duration of exposure al...
read more
-
What Temperature Can Silica Fabric Withstand? BSTFLEX’s 70% woven silica fabric has a published working-temperature limit of 800°C (1472°F), while its 96% high silica fabric is specified for continuous thermal exposure up to approximately 1000°C (1832°F). These figures apply to the stated products—not to every material sold as silica cloth, and not automatically to their coated or adhesive-backed ...
read more
-
Carbon Fiber Braided Sleeve Sizing and Installation Guide A braided sleeve does not have one fixed diameter. Push the ends toward each other and the tube opens; pull them apart and it becomes narrower. The length changes at the same time. That is why a sleeve that slips easily over the widest part of a mandrel may cover less of the part than its cut length suggests. Start with the part drawing, th...
read more
-
Biaxial vs Unidirectional Carbon Fiber Sleeve: Which Fiber Direction Does Your Layup Need? Two sleeves can look similar before resin is applied and behave very differently after curing. The question is where the main carbon fibers run. In a biaxial braid, they cross around the tube in two diagonal directions. In a unidirectional sleeve, the principal carbon fibers run along the part. A few small h...
read more
-
A removable insulation blanket has to survive more than steady heat. It may be unfastened, folded away from a valve, carried to a storage area and fitted again after maintenance. Each operation puts a different load on its stitched edges. Selecting stainless steel sewing thread therefore starts with the way the blanket is built and handled. For insulation fabricators sourcing a metallic thread, BS...
read more
-
3K vs 6K vs 12K Carbon Fiber Braided Sleeves: Tow Size and Product Selection A buyer asks for a 3K carbon fiber sleeve. The next question should be: for what installed diameter? The K designation describes the nominal filament count in a carbon tow; it does not specify a finished sleeve diameter, thickness or the strength of a cured tube. Those depend on the whole braid construction and the lamina...
read more
-
A sleeve that fits a wire on the bench may be difficult to install after the terminal has been crimped. It may also sit next to a motor winding, a hot appliance part or a sharp metal edge. Those details affect the sleeve you order. For electrical wiring, the useful starting point is the finished assembly and its working conditions, rather than a diameter and a temperature number alone. BSTFLEX's H...
read more