-
Vermiculite coated fiberglass fabric does not have one temperature rating that applies to every grade. Published working temperatures include 750°C and 815°C, while some constructions also carry a higher peak-exposure figure. These numbers are useful only when they identify the material, exposure conditions and performance that must be maintained. BSTFLEX Vermiculite Coated Fiberglass Fabric is pu...
read more
-
Vermiculite coated fiberglass fabric is widely used to manufacture welding blankets, curtains and hot-work barriers because the mineral-treated surface improves the thermal and abrasion performance of woven fiberglass. However, a fabric described as suitable for welding protection is not automatically suitable for every welding, cutting or molten-metal exposure. The correct material depends on wha...
read more
-
Ordering a custom exhaust insulation sleeve involves more than selecting a fiberglass material and giving an approximate pipe diameter. The sleeve has to fit the actual exhaust line, cover the correct heated section and remain practical to install around connections, bends and nearby equipment. For heater manufacturers, marine equipment suppliers, vehicle builders and replacement-part distributors...
read more
-
A roll of insulation is not the part that an assembler installs. Before it reaches the equipment, the material may be unrolled, nested, cut, stacked, transferred and fitted around openings or fixing points. For an OEM buyer, the useful question is whether the selected mat can move through that sequence and still meet the drawing. Specify stitch-bonded fiberglass needle mat by its fiber grade, rein...
read more
-
Knitted fiberglass gasket tape is worth evaluating when an equipment seal needs a soft, conformable strip. Woven fiberglass tape is an alternative where a firmer, more dimensionally restrained textile suits the joint. Neither construction is automatically the better seal. Compare the contact it makes under the available closing load, not just its softness in the hand. Both constructions are used i...
read more
-
The flexible connections around an induction furnace need their own protection plan. A water-cooled power lead, a separate cooling-water hose and a hydraulic line can run through the same area while performing very different jobs. Their outside diameters may look similar, but their electrical, cooling and mechanical requirements are not interchangeable. Fire sleeve for induction melting provides a...
read more
français
Deutsch
русский
italiano
español
português
Nederlands
العربية
日本語
한국의
Türkçe
Polski
Tiếng Việt
slovenský
Indonesia
