-
A removable insulation blanket has to survive more than steady heat. It may be unfastened, folded away from a valve, carried to a storage area and fitted again after maintenance. Each operation puts a different load on its stitched edges. Selecting stainless steel sewing thread therefore starts with the way the blanket is built and handled. For insulation fabricators sourcing a metallic thread, BS...
read more
-
A custom insulation blanket can only fit as well as the information used to make its pattern. Overall length and diameter are a useful starting point, but they do not show valve stems, flanges, support brackets, cable entries, drain points or the space available for opening the cover. This guide explains how to collect practical measurements for a removable insulation blanket, which photographs to...
read more
-
To measure custom sewn bellows, record the shortest and longest distances between the same two mounting reference points, the space required around the protected component, the maximum outside envelope and the dimensions of both end fittings. For a straight axial installation, the difference between the two installed lengths is the required bellows travel. A cylinder stroke or a photograph of an o...
read more
-
Fabric expansion joint failure can result from excessive temperature at a sealing layer, chemical attack, abrasion, movement beyond the approved limits, pressure fluctuations or damaged attachments. Several mechanisms may act together. A torn belt is the visible outcome; it does not, by itself, identify the original cause. For industrial duct, exhaust and flue gas systems, the useful question is n...
read more
-
Silicone coated fiberglass fabric for removable insulation jackets is used as a flexible outer cover around the insulation core. It provides a coated surface for handling and environmental exposure, while the insulation inside the jacket performs a different job: limiting heat transfer from the equipment. Choosing that outer fabric takes more than matching a color or thickness. A valve cover opene...
read more
-
There is no single correct thickness for every removable insulation blanket. Two covers installed on equipment at the same temperature may need different insulation thicknesses because the equipment diameter, ambient conditions, available clearance, core material and required surface performance are different. A useful thickness decision starts with the job the blanket must do. Is the priority to ...
read more
-
Replacing a worn machine bellows becomes difficult when there is no free end to slide a new cover over. A longitudinal zipper can provide another installation route: open the fabric body, position it around the existing component and close it in place. The benefit depends on the complete assembly, not the zipper alone. BSTFLEX sewn zippered bellows are made for applications requiring removable pro...
read more
-
Vermiculite coated fiberglass fabric does not have one temperature rating that applies to every grade. Published working temperatures include 750°C and 815°C, while some constructions also carry a higher peak-exposure figure. These numbers are useful only when they identify the material, exposure conditions and performance that must be maintained. BSTFLEX Vermiculite Coated Fiberglass Fabric is pu...
read more
-
Fabric expansion joints for fans and blowers connect the equipment to adjoining ductwork while accommodating specified movement and providing the required gas seal. Their flexible construction can reduce the transmission of mechanical vibration through the duct connection. However, the inlet and outlet must be assessed separately: matching a fan flange is only one part of selecting the joint. BSTF...
read more